PRODUCT

Take science and technology innovation, pursue outstanding as oneself duty

Micro-Surfacing / slurry seal truck

EQUIPMENT INTRODUCTION

This equipment was specially designed to preventively maintain the existing pavement and repair the wheel-path ruts. Slurry Seal & Micro-Surfacing is a cold mixing and cold paving system. It is a mixture of polymer-modified asphalt emulsion, mineral aggregate, mineral filler, water, and other additives, properly proportioned, mixed and paved on an existing pavement. This equipment is composed of truck chassis, aggregate hopper, asphalt tank, water tank, filler hopper, additives tank, mixture proportioning system, mixing system, paving and screeding system, hydraulic system, computer-control system, etc.. This equipment was firstly developed and manufactured by our company in China.



PERFORMANCE INTRODUCTION

  • 1
    High intelligent. It introduces programmed auto-control system. The operator only needs to input paving thickness, width and asphalt mixture proportion, then all the systems will run automatically.
  • 2
    Saving energy: It was not equipped with an auxiliary engine for the power system. Its power takes from truck engine and fully takes use of the extra power of truck engine.
  • 3
    The metering system is not required to re-calibrate when mix proportion changes, which benefits from its auto-control system.
  • 4
    High-quality paving: the hydraulic-driven and variable-width spreader box is equipped with four augers. In the process of paving, the augers rotation direction and speed are adjustable, which can realize two times mixing and no-segregation spreading to guarantee paving quality.
  • 5
    The aggregate, water and asphalt materials supplying systems are equipped with automatic alarming device. Any one material will be running out or run out, the system will automatic alarm or shutdown.
  • 6
    The asphalt pump is equipped with jacket-heating system which introduces cooling water of truck engine second-time heated by exhaust pipe.
  • 7
    The aggregate hopper is equipped with two beam vibrators and hopper walls use PE liner to ensure aggregate not bridging.

TECHNICAL PARAMETERS

Model

DGL5310TXJ (Euro III)

DGL5310TFC-X104(Euro IV)

Capacity of Aggregate Hopper (m3)

10

Truck Chassis

8*4

Capacity of Asphalt Tank (L)

2500

Engine Power (kW)

221

Capacity of Water Tank (L)

2500

Paving Width (mm)

2400 to 4200

Capacity of Filler Hopper (L)

400

Paving Thickness (mm)

5 to 15

Capacity of Additives Tank (L)

250

Paving Speed (km/h)

2 to 3

Agitator Type

Twin shafts with blades

Max. Output (kg/min)

2850

Total Weight (kg)

30700

Drive Type

Full hydraulic

Overall Dimensions (L×W×H) (mm)

12200×2500×3300

 

福建十一选五走势图下载 188比分直播吧足球比分 电影股票分析师 中国体育竞彩足球比分即时比分 重庆幸运农场 90vs篮球比分直播 贵州十一选五遗漏数 篮球比分网直播网 贵阳麻将实战经验 福建时时彩 透透网即时比分 澳洲幸运10赛车群 足彩 德州麻将的德州在哪 幸运3D走势图 湖北快3 安徽安庆麻将打法 188比分直播吧足球比分 电影股票分析师 中国体育竞彩足球比分即时比分 重庆幸运农场 90vs篮球比分直播 贵州十一选五遗漏数 篮球比分网直播网 贵阳麻将实战经验 福建时时彩 透透网即时比分 澳洲幸运10赛车群 足彩 德州麻将的德州在哪 幸运3D走势图 湖北快3 安徽安庆麻将打法